Loading ...
Loading ...
Loading ...
34
Note: The default setting of minute reminder and timer is 30 minutes.
Note: After adjusting, the setting in timer indicator will flashing for 5 seconds and
then stop flashing, then the setting be confirmed.
Note: The minute reminder and timer can be use at same time, timer indicator
shows the lowest time setting. If the lowest setting is minute reminder, the red
dot next to timer indicator will flash. If the lowest setting is timer setting, the red
dot of corresponding cooking zone power level indicator will flash.
Note: If indicator shows timer setting of cooking zone. To check minute reminder
setting, press the timer control button , the indicator will show minute
reminder setting.
Detection of Pan and Small Articles
For induction cooktop, if display flashes” “alternately with heat
setting.
• you have not placed a pan on the correct cooking zone or,
• the pan you’re using is not suitable for induction cooking or,
• the pan is too small or not properly centered on the cooking zone.
Notes:
1. No heating takes place unless there is a suitable pan on the cooking zone.
2. The display will auto turn off after 2 minutes if no suitable pan is placed on it.
3. When an unsuitable size or non-magnetic pan (e.g. aluminum), or some other
small item (e.g. knife, fork, key) has been left on the cooktop, the corresponding
cooking zone will automatically turn off in 1 minute.
Residual Heat Warning
Beware of hot surfaces
When the cooktop has been operating for some time, there
will be some residual heat. The letter “ H ”appears in power
setting indicator to warn you to keep away from it.
It can also be used as an energy saving function:
if you want to heat further pans, use the hotplate that is still hot.
Auto Shutdown
Another safety feature of the cooktop is auto shutdown. This occurs whenever you
forget to switch off a cooking zone. The default shutdown times as below table:
Loading ...
Loading ...
Loading ...