Signature NOUVEAU - SKSDW2411T Lave-vaisselle QuadWashMC Pro PowerSteam en acier inoxydable (cycle de lavage et de séchage d’une heure), série Transitional

User Manual - Page 24

For NOUVEAU - SKSDW2411T.

PDF File Manual, 188 pages, Read Online | Download pdf file

NOUVEAU - SKSDW2411T photo
Loading ...
Loading ...
Loading ...
24 OPERATION
Control Panel
Control Panel Features
a Power On/Off Button
Press this button to turn the washer on or off.
After the cycle is complete, the power automatically turns off for purposes of safety and economy.
If there is a power surge, power outage, or disruption of any kind, power is automatically turned off
for safety.
When power is connected again, the dishwasher will turn on automatically and resume the cycle.
b Option Setting Mode
You can set various options by using the Option Setting Mode.
While the appliance is off, press Power and Remote Start simultaneously to enter the Option
Setting Mode.
Refer to the Using the Option Setting Mode topic for each function of the Option Setting Mode.
c Display
Rinse Aid Refill
- This LED illuminates when the rinse aid level is low. The LED automatically shuts off when the rinse
aid is refilled or the level is set to 0.
- To adjust the rinse aid level, refer to the Using the Option Setting Mode topic.
Machine Clean
- The Machine Clean LED flashes every 30 cycles. To activate or deactivate the LED, refer to the
Using the Option Setting Mode topic.
8:88 : Digital Display
- The digital display on the control panel shows the ESTIMATED cycle time. When the cycle and
options are selected, the display shows the total estimated time to complete those selections.
During operation, the display shows the remaining estimated operating time.
NOTE
The estimated time shown on the display does not include delay times for heating water, etc.
•If Delay Start is selected, the display shows the delay time in hours.
Cycle time may vary depending on the soil level of your load.
CL : Control Lock
- The Control Lock feature helps prevent settings from being changed during a cycle. Selecting this
feature locks all of the buttons, except for the Power button, on the control panel. This feature
does not lock the door.
- While a cycle is running, press and hold Night Dry and Delay Start simultaneously for three
seconds to activate or deactivate Control Lock.
en-us_main.book.book Page 24 Monday, February 20, 2023 9:31 AM
Loading ...
Loading ...
Loading ...