Loading ...
Loading ...
Loading ...
English English11 12
Troubleshooting
If your camera is not powering on,
please apply the following solutions:
• Make sure the power switch is turned on
.
• Charge the battery with a DC 5V/2A power
adapter. When the green light is on, the
battery is fully charged.
If these won’t work, please contact Reolink
Support https://support.reolink.com/.
If the camera cannot scan the QR code on
your phone, please try the following solutions:
• Remove the protective lm from the camera
lens.
• Wipe the camera lens with a dry paper/
towel/tissue.
• Vary the distance between your camera
and the mobile phone so that the camera can
focus better.
Camera is Not Powering On
Failed to Scan QR Code on
Smartphone
• Try to scan the QR code under sucient
lighting.
If these won’t work, please contact Reolink
Support https://support.reolink.com/.
Reolink declares that this device is in
compliance with the essential requirements
and other relevant provisions of Directive
2014/53/EU and Directive 2014/30/EU.
Dimension: L84mm*W85mm*H118mm
Weight (Battery included):476g
Operating Temperature:
-10°C~ 55°C (14°F~131°F)
For more specications, visit
https://reolink.com
Specication
Notication of
Compliance
Reolink declares that this product is in
compliance with Radio Equipment
Regulations 2017 and Electromagnetic
Compatibility Regulations 2016.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
Note: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment o and on, the
user is encouraged to try to correct the
interference by one or more of the following
measures:
UKCA Declaration of Conformity
CE Declaration of Conformity
FCC Compliance Statements
Loading ...
Loading ...