Loading ...
Loading ...
Loading ...
Fisheye Parking Camera User Manual
19
Chapter 6 Storage
6.1 Set FTP
Set FTP parameters if you want to upload the captured pictures to the FTP server.
Before You Start
Set the FTP server, and ensure the device can communicate normally with the server.
Steps
1. Go to Configuration → Device Configuration → Encoding and Storage → FTP.
Figure 6-1 Set FTP
2. Enable the FTP server.
Note
You can only enable one FTP if the device does not support the violation capture, or you should
set different uploaded data for each FTP respectively.
Example
If you select FTP 1 as Upload Checkpoint Data, FTP 2 will be selected as Upload Violation Data
by default.
3. Optional: Check Upload Additional Information to FTP, and then the related information can be
attached when uploading.
4. Set FTP parameters.
1) Enter Server Address and Port.
Loading ...
Loading ...
Loading ...