Loading ...
Loading ...
Loading ...
EN - 7
EN
4.2 Setting the power level
(Fig. B)
• When the appliance is switched on, the
power is set to "0" by default. To start
cooking, set the power level using the slider
(7) or the specic buttons (6) and (8).
• The appliance automatically starts the
cooking cycle if the pot is detected.
If no pot is detected because it is not
present or because it is not suitably
sized, the letter "u" ashes on the
display with a dash "-"
underneath.
The hob turns off automatically
after 30 seconds if the power level
is set to 0, if no other operations
are performed and if no pot is
detected.
• The "Boost" function is available to heat/
boil a large amount of water or to carry
out the most intense cooking, which allows
the induction to run at the maximum power
available for a limited period of time (5
minutes).
• To activate the "Boost" function, set the "P"
level on the display with the slider (7) or by
pressing the button (8) several times. The
"Boost" function is automatically deactivated
at the end of the maximum safety time of 5
minutes, after which the power is reduced
to level 9.
• To deactivate the "Boost" function, set
another level of power on the display with
the slider (7) or by pressing the button (6)
several times.
• The display shows the residual heat when
completing the cooking cycle:
" " low residual heat.
" " medium residual heat.
" " high residual heat.
Use
Before touching the appliance
to store or clean it, wait for the
residual heat indication shown on
the display to disappear.
Pay close attention.
Danger of burns!
• Depending on the set power level, the
appliance has a maximum operating
time, at the end of which it switches off
automatically or, in the case of the "Boost"
function, returns to the lower power level.
The table shows the maximum operating
time:
Power level
Auto power-off
time
Keep Warm 2 hours
1 6 hours
2 6 hours
3 5 hours
4 5 hours
5 1.5 hours
6 1.5 hours
7 1.5 hours
8 1.5 hours
9 1.5 hours
P 5 minutes
Loading ...
Loading ...
Loading ...