Loading ...
Loading ...
Loading ...
Ti100, Ti105, Ti110, Ti125, TiR105, TiR110, TiR125
Users Manual
38
CNX™ Wireless System
The Imager supports the Fluke CNX™ Wireless System (may not be available
in all regions). It can discover up to 10 3000 Series wireless tools up to 20
meters away. From those 10, you can select 5 tools to view their live
measurements on the Imager display.
To discover a supported tool:
1. If not already on, turn on each wireless tool and make sure the wireless
feature is enabled. See the documentation of each tool for more
information about how to use.
2. Turn on the Imager.
3. Push .
4. Push / to highlight Camera.
5. Push or to view the menu.
6. Push / to highlight CNX.
7. Push or to view the menu.
8. Push / to highlight ON.
9. Push or start the discovery process.
When done, the Imager presents a list with the ID and name of available
tools found within the 20 m distance.
10. Push / to highlight a tool name.
11. Push to select the tool.
12. Repeat steps 10 and 11 for each tool to show on the display.
13. Push when done.
The labels change to include an Edit function. By default, the Imager
shows and saves the data for the selected tools. If these settings are
acceptable, push to exit the CNX setup menu.
To edit the selection:
14. Push / to highlight the tool name.
15
. Push or to view the Edit menu. The Edit menu gives you a
choice to display the measurement data and/or save it to the SD memory
card.
16. Push to accept the change.
17. Push when done to exit the menu.
The display updates to show the wireless icon and live measurement for
each selected wireless tool.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
Loading ...
Loading ...
Loading ...