Loading ...
Loading ...
Loading ...
Page 14
OPERATING CHECKLIST
Location
Operating Conditions
Place the pressure washer on a level surface outside. Never use an extension cord with
the electric pressure washer. If the power supply cord will not reach a receptacle, move the
pressure washer closer to the receptacle.
WARNING:WARNING:
Failure to inspect this product before use could create a hazardous situation resulting
in product damage, serious injury, and/or death. To avoid these hazards, inspect the
pressure washer before each use. Check for loose or damaged parts, signs of oil leaks,
missing guards, plugged cooling vents, or any other condition that may aect proper
operation. Repair or replace all damaged or defective parts and keep all safety guards in
place and in proper working order before using the pressure washer.
INSPECT BEFORE OPERATING
WARNING:WARNING:
Untrained adults and children can be seriously injured or killed if allowed to incorrectly
operate or play with running pressure washer. To avoid these hazards, be sure anyone
operating the pressure washer receives proper instructions, understands safe operation,
and has read the owner’s manual before operating this product. Do not let children
operate the pressure washer without parental supervision. Keep children and pets away
from the pressure washer while it is running. Always turn o the pressure washer before
leaving the area.
UNTRAINED OPERATION
WARNING:WARNING:
Spray can splash back or propel objects. Always wear properly rated eye protection
such as safety goggles or face shield while spraying. (Safety glasses do not provide full
protection).
RISK OF EYE INJURY
Know how to stop the product and bleed pressures quickly. Be throughly familiar with the
controls. Stay alert - watch what you are doing. Do not overreach or stand on unstable
support. Keep good footing and balance at all times. Do not operate the product when
fatigued or under the inuence of alcohol or drugs. Keep operating area clear of all persons.
Before each use, check for loose or damaged parts, leaks, and/or any other condition
that may aect proper operation. Repair or replace all damaged and/or defective parts
immediately. Always keep all safety guards in place and in proper working order. For safety
reasons, the manufacturer recommends all maintenance and repairs be performed by an
authorized service center.
Before using the pressure washer, remove any excessive dirt and debris from the cooling
vents of the motor. Always operate the pressure washer on a level surface and never move
or tip the pressure washer while operating. Use the pressure washer only for its intended
purpose. If you have questions about the proper use of your pressure washer, please
contact customer support at 1-877-362-4271 or [email protected].
Loading ...
Loading ...
Loading ...