Loading ...
Loading ...
Loading ...
BLUETOOTH CONNECTION
STEP 1
● Once the heater is plugged into the outlet it will be in standby mode. You will hear the
prompt “Waing for Bluetooth connecng”
STEP 2
● Go to the “Sengs” on the smartphone or MP3 player that has bluetooth capabilies
and locate the Bluetooth opon. Turn on Bluetooth opon if it does not already have
it on.
STEP 3
● Make sure the smartphone or MP3 device is in pairing mode. Look for the
“HEATSTORM” connecon. Tap the “HEATSTORM” connecon. The smartphone and
device will then begin the pairing process.
STEP 4
● If the smartphone and the MP3 device is paired correctly, the heater will respond with
“PAIRED”. If the device does not connect a prompt will be given “Pairing Unsuccessful”.
When the device is turned o the heater will say “Disconnected”. Once your
smartphone or MP3 device has be paired, the device will always remember the
“HEATSTORM” bluetooth seng.
*For Model HS-1500-ILODS
TROUBLESHOOTING GUIDE
When I power the heater
ON it doesn’t blow any air
at rst
The heater is funconing as it should. The rst 15 seconds
allows the infrared elements to get hot so that once the fan
does begin to blow it will move warm air into the room.
Why doesn’t my heaters
temperature match my
central heang thermostat?
All thermostats vary in their temperature seng. In most
cases the central heang thermostat is not as accurate as
your Heat Storm heaters thermostat. However, you can
calibrate your Heat Storm heater’s thermostat to match
your central heang thermostat if you choose. Please see
the “Calibraon” secon of this manual.
The heater keeps blowing
air when the leaf symbol is
not red or green
There is nothing wrong. This is the cool down phase. The
heater will run for several minutes. This increases the
lifespan of the heater.
The heater does not blow
warm air
A -Check if the air inlet is blocked or the air lter is dirty
and needs to be cleaned
B -The ambient temperature is higher than the thermostat
seng.
C - Unplug the unit from the wall outlet for 2 hours. Aer
2 hours plug the unit back into wall outlet, and operate as
normal.
8 9
Loading ...
Loading ...
Loading ...