Heat Storm HS-1500-ILODS

Portable Quartz Infrared Heater User Manual - Page 10

For HS-1500-ILODS.

PDF File Manual, 17 pages, Download pdf file

Loading ...
Loading ...
Loading ...
BLUETOOTH CONNECTION
STEP 1
Once the heater is plugged into the outlet it will be in standby mode. You will hear the
prompt Waing for Bluetooth connecng
STEP 2
Go to the “Sengs” on the smartphone or MP3 player that has bluetooth capabilies
and locate the Bluetooth opon. Turn on Bluetooth opon if it does not already have
it on.
STEP 3
Make sure the smartphone or MP3 device is in pairing mode. Look for the
“HEATSTORM” connecon. Tap the “HEATSTORM” connecon. The smartphone and
device will then begin the pairing process.
STEP 4
If the smartphone and the MP3 device is paired correctly, the heater will respond with
“PAIRED. If the device does not connect a prompt will be given “Pairing Unsuccessful”.
When the device is turned o the heater will say “Disconnected”. Once your
smartphone or MP3 device has be paired, the device will always remember the
“HEATSTORM” bluetooth seng.
*For Model HS-1500-ILODS
TROUBLESHOOTING GUIDE
When I power the heater
ON it doesn’t blow any air
at rst
The heater is funconing as it should. The rst 15 seconds
allows the infrared elements to get hot so that once the fan
does begin to blow it will move warm air into the room.
Why doesn’t my heaters
temperature match my
central heang thermostat?
All thermostats vary in their temperature seng. In most
cases the central heang thermostat is not as accurate as
your Heat Storm heaters thermostat. However, you can
calibrate your Heat Storm heaters thermostat to match
your central heang thermostat if you choose. Please see
the “Calibraon” secon of this manual.
The heater keeps blowing
air when the leaf symbol is
not red or green
There is nothing wrong. This is the cool down phase. The
heater will run for several minutes. This increases the
lifespan of the heater.
The heater does not blow
warm air
A -Check if the air inlet is blocked or the air lter is dirty
and needs to be cleaned
B -The ambient temperature is higher than the thermostat
seng.
C - Unplug the unit from the wall outlet for 2 hours. Aer
2 hours plug the unit back into wall outlet, and operate as
normal.
8 9
Loading ...
Loading ...
Loading ...