Loading ...
Loading ...
Loading ...
14 en | Installation FLEXIDOME panoramic 5100i IR
2022-01 | V01 | F.01U.385.630
Installation manual
Bosch Security Systems B.V.
2. Mark the positions of the screw holes on the surface.
Note: For standard installation, use the mounting holes marked with a B on the mounting
plate. For a different installation, for example for an installation on an electrical box, use
different mounting holes. For more information, refer to the table above.
i
Notice!
If you need more space for cables, NDA-U-CBB provides additional space underneath the
camera for wiring and cables.
15 - 50cm
(6 - 20”)
NDA-U-CBB
3. Pull the cable through the center hole of the mounting plate.
Note: If the cable is not coming out the wall, but along the wall, then the mounting plate
needs to be installed in line with the cable. That way the cable won’t come through the
center hole. The mounting plate has one side available for side entry of a cable. Remove
the door on the camera base.
4. If you are installing on a concrete wall/ceiling, use an appropriate size drill and screws.
Note: Allow 15-50cm (6-20inch) cable length to ensure proper installation and to
prevent excessive cable length. If you are using 4S box or installing on wood, this step is
not needed.
Loading ...
Loading ...
Loading ...