AMERICAN-STYLE CREEPER 36” WITH
STEEL FRAME & 6 WHEELS
MODEL NO: SCR75.V3 SERIES
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this
creeper.
9 Locate creeper in a suitable working area.
WARNING! Use creeper on level and solid ground, preferably concrete.
9 Keep the creeper clean and tidy in accordance with good workshop practice.
8 DO NOT use the creeper for any purpose other than that for which it is designed.
8 DO NOT stand on the creeper.
8 DO NOT get the creeper wet or use in damp or wet locations or areas where there is condensation.
8 DO NOT clean the creeper with any solvents which may damage the paint surface or padded areas.
2. INTRODUCTION
Heavy-duty steel framework with powder coat paint nish. Easy-rolling Ø60mm composite castors with ball bearing swivels. Features vinyl
covered back and headrest.
3. SPECIFICATION
MODEL NO: .......................................... SCR75.V3 SERIES
Capacity: ...................................................................... 150kg
Size(s): ......................................................920 x 430 x 95mm
Wheels: ................................................................................ 6
SCR75.V3 SERIES Issue 1 22/01/2021
Original Language Version
© Jack Sealey Limited
Refer to
instructions
Wear protective
gloves
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
