CREEPER TOOL TRAY
MODEL NO: SCR86 SERIES
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
▲ DANGER! Never work under a vehicle which is supported by a jack only. Always use axle stands and ensure that wheels are rmly
chocked and that the handbrake is applied. Please refer to the Jacking & Lifting section for our range of professional axle stands.
WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this
creeper.
9 Locate creeper in a suitable working area.
WARNING! Use creeper on level and solid ground, preferably concrete.
9 Keep the creeper clean and tidy in accordance with good workshop practice.
9 Maintain product labels and nameplates. These carry important safety information. If unreadable or missing, contact your Sealey
Stockist for a replacement.
8 DO NOT use the creeper for any purpose other than that for which it is designed.
8 DO NOT sit or stand on the creeper.
8 DO NOT get the creeper wet or use in damp or wet locations or areas where there is condensation.
8 DO NOT clean the creeper with any solvents.
8 DO NOT allow children to play with or near this item. This product is not a toy.
WARNING! DO NOT STAND OR SIT ON THIS ITEM.
2. INTRODUCTION
Creeper tool tray provides convenient organisation to help you work more eciently. Features ve compartments to hold and organise your
tools and fasteners. Two large 5cm deep 39 x 16cm compartments, two 2.5cm deep 18 x 5cm compartments and a 5cm deep 8 x 4cm
compartment. 360° Plastic swivel wheels are durable and smooth over workshop oors. Features metal plate to attach magnetic work light.
3. SPECIFICATION
MODEL NO: .............................................................. SCR86
Capacity: ........................................................................ 30kg
Size(s): ....................................................465 x 480 x 100mm
Wheels: ................................................................................ 4
4. ASSEMBLY
4.1. Place the Frame on a at level surface.
4.2. Insert a Caster into the underside of a Frame corner. Twist into place.
4.3. Use the included Wrench to tighten the Caster’s bolt securely.
4.4. Repeat for all four corners.
SCR86 Series Issue 1 22/02/2021
Original Language Version
© Jack Sealey Limited
Refer to
instructions
Wear protective
gloves
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
