Loading ...
Loading ...
Loading ...
Chapter 2 Device Management
You can perform device conguraon and management on the iVMS-4200 client, mainly including
network parameter
conguraon, port conguraon, network topology management, etc.
Note
This chapter will briey introduce device management via iVMS-4200 client. For other funcons,
please refer to iVMS-4200 Client User Manual.
2.1 Acvate Device
For an inacve device, you are required to create a password to acvate it before it can be added
to the client and work properly.
Before You Start
Make sure that the device to be
acvated is connected to the network and is in the same network
segment with the PC running the client.
Steps
Note
This funcon should be supported by the device.
1.
Click Maintenance and Management → Device Management → Device .
2.
Click Online Device.
The searched online devices are displayed in the online device list.
3.
Check the device status (shown in the Security Level column), and select an
inacve device.
Figure 2-1 Online Device List
4.
Click Acvate.
Switch Client User Manual
2
Loading ...
Loading ...
Loading ...