Loading ...
Loading ...
Loading ...
4 www.westinghouse.com.au / www.westinghouse.co.nz
• Do not install the appliance behind a lockable
door, a sliding door or a door with a hinge on the
opposite side, that would prevent the appliance
door from being fully open.
• The ventilation opening in the base must not be
covered by a carpet, mat, or any floor covering.
• WARNING: The appliance must not be supplied
through an external switching device, such as a
timer, or connected to a circuit that is regularly
switched on and off by a utility.
• Connect the mains plug to the mains socket only
at the end of the installation process. Make sure
that the mains plug is accessible after installation.
• Ensure good air ventilation in the room where the
appliance is installed to avoid the back flow of
unwanted gases into the room from appliances
burning gas or other fuels, including open fires.
• WARNING: Do not install the appliance in an
environment with no air exchange.
The appliance contains flammable gas, propane
(R290), a gas with a high level of environmental
compatibility. Keep fire and ignition sources
away from the appliance. Be careful not to cause
damage to the refrigerant circuit containing
propane.
• WARNING: In the appliance enclosure or in the
built-in structure, keep ventilation opening clear of
obstruction.
• WARNING: Do not damage the refrigerant circuit.
• If the mains power supply cable is damaged,
it must be replaced by the manufacturer, its
Authorized Service Centre or similarly qualified
persons to avoid an electrical hazard.
• Do not exceed the maximum load of 9 kg (refer to
the “Program chart” chapter).
• Do not use the appliance if items have been soiled
with industrial chemicals.
Loading ...
Loading ...
Loading ...