Loading ...
Loading ...
Loading ...
17
ENGLISH
Possible causes of unsatisfactory
drying results:
• Inadequate default dryness level
settings. See chapter Adjustment
of default dryness level
• Room temperature is too low
or too high. Optimal room
temperature is between 18°-25°C.
Always clean the filter and
empty the water container
when a program is completed.
10.5 Stand-by function
To reduce energy consumption, this
function automatically deactivates
the appliance:
• After 5 minutes if you do not start
the program.
• After 5 minutes from the end of
the program.
10.4 At the end of the
program
When the program is completed:
• An intermittent acoustic signal
operates.
• The display shows .
• The indicator is blink.
• The indicators Filter and
Tank may come on.
• The Start/Pause indicator is on.
The appliance continues to operate
with the anticrease phase for
approximately 30 minutes or more if
Extra Anticrease option was set (see
chapter Option -Extra Anticrease).
The anticrease phase reduces
creasing.
You can remove the laundry before
the anticrease phase is completed.
We recommend, for better results,
that you remove the laundry when
the phase is almost completed.
When the anticrease phase is
completed:
• The display still shows .
• The indicator is off.
• The indicators Filter and
Tank remain on.
• Start/Pause indicator goes off.
1. Press the on/off button to
deactivate the appliance.
2. Open the appliance door.
3. Remove the laundry.
4. Close the appliance door.
Loading ...
Loading ...
Loading ...