Forno FFSGS6439-30 User Manual

Loading ...

STEP 5: Gas Valve

a. Remove control knobs.

STEP 6: Reconnect Gas and Electrical Supply

Leak testing of the range shall be conducted according to the installation instructions provided with

the range.

Before operating the range after the gas conversion, always check for leaks with a soapy water

solution or other acceptable method in at gas connections installed between the gas inlet pipe of the

range, gas regulator, and the manual shut-off valve.

b. Using a flat screwdriver, adjust main burner bypass jets toward to 1/4 circle for LP until the flame

is normal. For 9,000btu and 15,000btu burners, please refer to fig.1, which is in the center of valve

axis. For 20,000btu burners, please refer to fig.2, which is in the left side of valve axis.

Use soapy solutions to check for leakage on all joints.

fig.1

fig.2

PLEASE NOTE: If the bypass jets screw is tighten too much, the igniter will go ON when burner is

set to minimum because the gas outlet is too low.

Loading ...

Forno FFSGS6439-30 Freestanding French Door Gas Range with Air Fry, Steam Clean Oven