Loading ...
Loading ...
Loading ...
13
DISCONNECT POWER AND ALLOW THE HEATER TO COOL BEFORE ATTEMPTING ANY MAINTENANCE OR
CLEANING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR DAMAGE TO PEOPLE.
THE FIREPLACE SHOULD NOT BE OPERATED WITH AN ACCUMULATION OF DUST OR DIRT ON OR IN THE UNIT, AS
THIS CAN CAUSE A BUILD-UP OF HEAT AND POTENTIAL DAMAGE. FOR THIS REASON, THE HEATER MUST BE
INSPECTED REGULARLY, DEPENDING ON CONDITIONS, AND AT LEAST AT YEARLY INTERVALS.
6.1 PARTIALLY REFLECTIVE GLASS CLEANING
The partially reflective glass is cleaned in the factory during the assembly operation. During shipment,
installation, handling, etc., the partially reflective glass may collect dust particles; these can be removed by
dusting lightly with a clean, dry cloth.
The partially reflective glass can be cleaned with a damp cloth to remove fingerprints or other marks. The
partially reflective glass should be completely dried with a lint-free cloth to prevent water spots. To prevent
scratching, do not use abrasive cleaners.
6.2 SCHEMATIC DIAGRAM
6.0 MAINTENANCE
Loading ...
Loading ...
Loading ...