Loading ...
Loading ...
Loading ...
9
POWER
To activate or deactivate all the functions including all lighting types and
heating modes.
FLAME
To activate or deactivate the flame.
DIMMER
To adjust the brightness of the flame (5 different light variants adjustable).
CANDLE
/CHARCOAL
When the HEAT is on, the CANDLE/CHARCOAL light is steadily on and cannot
be turned off. When the POWER is on and the HEAT is off, the
CANDLE/CHARCOAL can be turned off.
Note:The light flashing mode can be adjusted by the button. When the
power is on, the light is steady. When pressing the button once, the light
flashes.
HEAT I/II
Press the HEAT button one time to enable the fireplace to operate at 750
watts. Press it the second time to enable the fireplace to operate at 1, 500
watts. Press it the third time to shut down the fireplace.
FLAME SPEED
Control Flame Speed.
5 Settings: L1-L2-L3-L4-L5. The flame speed can be adjusted from L1 to L5.
L5 is the fastest setting.
NOTICE: When the heater is turned on for the first time, a slight odor may be present. This is normal and
should not occur again unless the heater is not used for a long period of time.
NOTICE: To improve operation, aim the remote control at the front of the fireplace. DO NOT press the
buttons too quickly. Give the unit enough time to respond to each command.
TIP
Please put the heater 2.9 inches-4.5 inches (75mm-115mm)
away from the wall for a more realistic flame effect.
Loading ...
Loading ...
Loading ...