Loading ...
Loading ...
Loading ...
4
For the User
1. USING THIS UNIT
1.1 YOUR VENTILATION SYSTEM
This unit is designed to provide fresh air to your home while exhausting stale, humid air. By eliminating accumulated pollutants and
humidity, it maintains an optimum air quality and an ideal relative humidity. It is equipped with a recovery core that is designed specifically
to control excess humidity and reduce ventilation costs by recovering the heat or energy from the exhausted air, and using that same heat
or energy to warm the fresh air being supplied. This recovery process is accomplished in such a way that the stale air is never mixed with
the fresh air.
When the outdoor temperature is below -5°C (23°F), recovery creates frost in the module. To maintain proper operation, the unit is
programmed to defrost the recovery module. The defrost duration and frequency vary according to the outdoor temperature. After defrosting,
the unit returns to the operating mode selected by the user.
Before using this unit for the first time, please take the time to carefully read page 2 of this guide to ensure it is
used safely and and properly.
CAUTION
What problem were you trying to solve with
your purchase? (Check each one that applies
to you.)
Bad odors
Respiratory
problems
Excess of humidity
Temperature
standardization
Lack of fresh air
Dust
Mildew
Allergies
No specifi c
problems
Others
Who installed your unit?
Home builder
Recommended
installer
Friend / family
Contractor
Yourself
Please read the following list of criteria
carefully. Indicate the importance of your
purchase decision on a scale of 1 (less
important) to 5 (most important).
Price
Warranty
Product design
Ventilation
capacity
Filter maintenance
indicator
Filtration quality
Recirculation
Heat recovery
Controls
Ease of cleaning
Manufacturer’s
reputation
Ease of use
Noise level
Other
Quels problèmes essayez-vous de résoudre
par cet achat? (Cochez toutes les cases
pertinentes)
Mauvaises odeurs
Problèmes
respiratoires
Excès d’humidité
Uniformisation
de la température
Manque d’air frais
Poussières
Moisissures
Allergies
Pas de problèmes
spécifi ques
Autres (Précisez SVP)
Qui a installé l’appareil?
Constructeur
de la maison
Installateur
recommandé
Ami/membre
de la famille
Entrepreneur
Vous-même
Veuillez lire la liste des critères de sélection
ci-dessous. Sur une échelle de 1 (étant le moins
important) à 5 (étant le plus important), veuil-
lez indiquer l’importance de chacun d’entre
eux dans votre décision d’achat.
Prix
Garantie
Design du produit
Débit de
ventilation
Indicateur
d’entretien du fi ltre
Qualité de fi ltration
Recirculation
Récupération
de chaleur
Récupération
d’énergie
Fonctions
Facilité de
nettoyage
Réputation
du fabricant
Simplicité
d’utilisation
Niveau de bruit
Autres
(Précisez SVP)
Would you like to receive occasional informational e-mail off ers including
product updates and special promotions from us?
Yes/No
Aimeriez-vous recevoir plus de détails sur nos promotions, off res de rabais et mises à jour
de nos produits?
Oui/Non
Are you connected? Please do not hesitate to complete the product registration
card via our Web site at www.bnv.ca
Enregistrez-vous en ligne! N’hésitez pas à remplir la fi che d’enregistrement
du produit sur notre site Internet au www.bnv.ca
1.2 INTEGRATED CONTROL
Unit Booting Sequence
The unit’s booting sequence is similar to a personnal computer’s booting sequence. Each time the unit is plugged in after being unplugged,
or after a power failure, it will perform a 30-second booting sequence before starting to operate. No command will be taken until the
unit is fully booted.
This unit is equipped with an integrated control, located on its upper left side.
• Use the integrated push-button (1) to go from OFF to Low Speed, to High Speed, and back to OFF.
• The color of the LED indicator shows what speed the unit is running in:
• If a problem occurs while the unit is running, the LED indicator (2) will blink. The color of the blinking
light indicates the type of error detected. Refer to Troubleshooting section.
For more convenience, these units can also be controlled using an optional wall control. When using an
optional control, unit must be set to OFF using the integrated push-button.
For more information about their operation modes, refer to the Main and auxiliary wall control User Guide,
included with the ventilation unit and also available at www.vanee.ca or www.venmar.ca.
LED COLOR RESULTS
AMBER Unit is on Low speed
GREEN Unit is on High speed
NO LIGHT
Unit is OFF or controlled
by a main control
VE0220
1
2
Loading ...
Loading ...
Loading ...