Loading ...
Loading ...
Loading ...
Oil drain tube, 1 pcs
To install the lower cover
1. Install the lower cover (B).
2. Carefully push the lower cover (B) to attach it to the
cover tabs (C) in the slots that taper (D).
B
A
D
C
CAUTION: Be careful when you
attach the lower cover, there is a risk of
damage to the lower cover tabs (C).
3. Install the fastener (A) to the lower cover (B).
4. Lower the engine cover.
To adjust the seat
1. Lift the seat up and remove the seat adjustment
knob (A).
2. Loosen the seat adjustment knob (B).
A B
3. Move the seat until it is in a position where you can
push the brake and clutch pedals down.
4. Line up the hole in the seat plate for seat adjustment
knob (A) with the hole in the seat.
5. Install and tighten the seat adjustment knob (A).
6. Tighten the seat adjustment knob (B).
To connect the battery
WARNING: Risk of electrical shock and
burn injuries. Do not use metal wristbands
or other metal accessories. Metal items that
touch the battery terminals can cause burn
injuries, electrical shock, and short circuit of
the battery.
Note: If it is after the year and month that is written on
the battery label, charge the battery. Charge the battery
for a minimum of 1 hour at 6–10 A.
1. Find the battery location below the seat or the
engine cover.
2. Lift the seat pan or the engine cover to the raised
position.
3. Remove the 2 terminal caps (A) and discard them.
A
4. Connect the red battery cable to the positive (+)
terminal and tighten the bolt and nut as shown. Move
the terminal cover on the terminal.
WARNING:
Risk of sparks. The red
battery cable must be connected to the
positive terminal before the black battery
cable is connected to the negative
terminal. This is to prevent sparks and
accidental grounding.
5. Connect the black cable to the negative (-) terminal
and tighten the bolt and nut fully.
6. Apply petroleum jelly on the battery cables to
prevent corrosion.
7. Lower the seat pan or the engine cover.
To move the product off the skid
1. Lift the cutting deck to its highest position. Use the
lift lever.
1720 - 004 - 22.09.2023
11
Loading ...
Loading ...
Loading ...