Loading ...
Loading ...
Loading ...
7
To remove the filter alert and reset filters duration:
After replacing the charcoal filter, to remove the filter alert on the display, retrieve another 6 months
duration.
Press Setting key, use Arrow key to select Cleaning and Maintenance submenu, press
CONFIRM/MENU key to enter.
Use Arrow key to select Reset filter submenu, press CONFIRM/MENU key to reset.
The charcoal filter retrieves another 6 months duration now.
NOTE: For roof venting and wall venting, the charcoal filter is not necessary, but the filter alert will
still appear every 6 months. You can follow the above steps to remove the alert.
Illustration 3
B
A
C
D
A. Holes
B. Hooks
C. Charcoal
Filter
D. Bottom
Plate
INSTALLATION INSTRUCTIONS
REQUIREMENTS
Tools and Parts
Tools Needed
� Measuring tape
� Pencil
� Scissors
� Masking tape or thumbtacks
� Drill
� No. 2 Phillips screwdriver
� Stud finder
� No. 3 Phillips screwdriver for 1/4-20 x 3" (76 mm) bolts
� 3/16" (5 mm), 3/8" (10 mm), 5/8" (16 mm) drill bits
� 3/4" (19 mm) hole saw
� Keyhole saw
� Diagonal wire cutting pliers
� 7/16" (11 mm) socket wrench (or box wrench) for 1/4" x 2"
(6.4 mm x 51 mm) lag screws
� 1
1
/
2
" (38 mm) diameter hole drill bit for wood or metal cabinet
� Caulking gun and weatherproof caulking compound
� Duct tape.
Materials Needed
� Standard fittings for wall or roof venting. See the “Venting
Design Specifications” section.
Loading ...
Loading ...
Loading ...