Hikvision DS-K1T502DBWX-C User Manual

Loading ...

Note

By default, the hotspot name is the AP_Device Serial No.

Click Save.

Plaorm Access

Plaorm access provides you an opon to manage the devices via plaorm.

Steps

Click Conguraon → Network → Device Access → Hik-Connect to enter the sengs page.

Note

Hik-Connect is an applicaon for mobile devices. With the App, you can view live image of the

device, receive alarm nocaon and so on.

Check Enable to enable the funcon.

Oponal: Check the checkbox of Custom, and you can set the server address by yourself.

Enter the server IP address, and

vericaon code.

Note

●

6 to 12 leers (a to z, A to Z) or numbers (0 to 9), case sensive. You are recommended to use

a combinaon of no less than 8 leers or numbers.

●

The vericaon code cannot be 123456 or abcdef (case non-sensive0).

Set the Network Connecon Priority. You can enable Allow Access, and click the network and

drag it to adjust the network priority.

Click Save to enable the

sengs.

Set ISUP Parameters

Set the ISUP parameters for accessing device via ISUP protocol.

Steps

Note

The funcon should be supported by the device.

Click Conguraon → Network → Device Access → ISUP .

Check Enable.

Set the ISUP version, server address, device ID, and the ISUP status.

Note

If you select 5.0 as the version, you should set the Encrypon Key.

DS-K1T502 Series Access Control Terminal User Manual

Loading ...

Hikvision DS-K1T502DBWX-C Access Control Terminal