Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/87504790-ds-k1t502dbwx-c/bg1a.png)
Chapter 4 Acvaon
You should acvate the device before the rst login. Aer powering on the device, the system will
switch to Device
Acvaon page.
Acvaon via the device, SADP tool and the client soware are supported.
The default values of the device are as follows:
●
The default IP address: 192.0.0.64
●
The default port No.: 80
●
The default user name: admin
4.1
Acvate via Mobile Web
You can acvate the device via mobile web.
Steps
Note
Aer powering on the device for the rst me, the hotspot funcon is enabled by default.
1.
Enable the mobile phone's Wi-Fi funcon. Search and add the device hotspot (hotspot name:
AP_Serial No.).
Note
●
Hotspot name/password: AP_Serial No.
●
Hold key 5 on the device keypad for 10 s to enable/disable the hotspot funcon.
●
Aer 30 min aer device powering on, the hotspot funcon will be disabled automacally.
●
Aer device acvaon, the hotspot password will be changed to the device acvaon
password.
2.
The mobile phone will jump to the web browser page. Create a new password (admin password)
and
conrm the password.
Note
Characters containing admin and nimda are not supported to be set as acvaon password.
Cauon
STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password of
your own choosing (using a minimum of 8 characters, including upper case leers, lower case
leers, numbers, and special characters) in order to increase the security of your product. And
we recommend you reset your password regularly, especially in the high security system,
reseng the password monthly or weekly can beer protect your product.
DS-K1T502 Series Access Control Terminal User Manual
12
Loading ...
Loading ...
Loading ...