Loading ...
Loading ...
Loading ...
6
Startup
Proper startup is crucial to expand the life of NVR/DVR.
Step 1 Plug power supply into an electrical outlet.
Step 2 Press the power button (certain models may have power button on the front or rear panel).
The device begins to start.
Activate Your Device
No operation is allowed before activation. For the first-time access, it requires to set an admin
password for device activation. You can also activate the device via web browser, SADP or client
software.
Step 1 Enter the new password, and confirm it.
Step 2 Optionally, set reserved email, Hik-Connect, security questions, or export GUID for password
resetting in the future.
Step 3 Set the password to activate the network camera(s) connected to the device.
Step 4 Save the password and activate the device.
Network Settings
You shall properly configure the network settings before you operate your device over network.
Step 1
Go to Configuration > Network > General.
Step 2 Set network parameters.
Step 3 Optionally, for Wi-Fi devices, go to Configuration > Wi-Fi to configure wireless network
parameters.
Step 4 Optionally, for 3G or 4G devices, install the micro SIM/UIM card and antenna, and go to
Configuration > Wireless > Dial Settings to configure wireless dial settings. For operation details,
please refer to the user manual.
Step 5 Click Apply.
Add Network Camera
Before getting live video or record the video files, you shall add network camera to your device.
Step 1 Go to Configuration > Camera.
Step 2 Optionally, for certain DVR models, configure the analog and IP signal input types.
Step 3 Click IP Camera > Custom Add.
Step 4
Set the IP camera parameters and add it.
Step 5 Click Add.
Step 6 Optionally, for Wi-Fi devices, select Wi-Fi Match from the right-click menu in live view mode,
and the device will search and add Wi-Fi cameras.
Configure Hik-Connect
Hik-Connect provides mobile phone application and platform service to access and manage your
connected devices, which enables you to get a convenient remote access to the video security
system.
Step 1 Go to Configuration > Network > Hik-Connect.
Step 2 Enable the function and accept service terms.
Loading ...
Loading ...
Loading ...