Loading ...
Loading ...
Loading ...
8-Advanced Function of Oscilloscope
68
8.14.1 Real time clock
Function: Be synchronous with the U disk storage time.
Do below steps to set up the real time clock:
1. Press MENU key and the function menu is displayed on the right side of the screen.
2. Press MENU ▲ or MENU ▼ key and select SYS STAT and there will be 4 items displayed
at the bottom of the screen.
3. Press F4 key and select Misc to display the system time, see Fig.60.
Fig.60: System Time
4. Press OPTION to enter into timing mode and if that the background color of the year, month,
date, hour, minute, second which are in need of correct be deepened, the value can be adjusted.
5. Press OPTION▲ or OPTION▼ to change the corresponding value of the year, month, date,
hour, minute and second effectively.
6. Press OPTION ◄
or OPTION ►
to switch to the year, month, date, hour, minute and second
that are in need of adjustment.
7. Press OPTION to enter into normal time mode after timing.
8. If need to timing, please kindly repeat the above steps.
Note: The digital clock stops working when in time calculating mode.
8.15 Setting of Time Base Mode
The time base mode menu is explained as the following table.
Function menu Setting Explanation
Main TimeBase Horizontal main time base is used to wave display
Zone Window Use two cursors to define a window area
Window Expand the defined window to full-screen display
For the operation of window extension, please execute the following steps:
Loading ...
Loading ...
Loading ...