Loading ...
Loading ...
Loading ...
6-Using the Oscilloscope
24
waveform data will be saved into the USB mass. The save waveform has two format, one is vector
format and the other is bitmap format, according to the display settings from the choice of the
communication settings. Name the file with current date and suffix by .bin or .bmp. Then connect
the USB mass storage device with the computer after data is saved, and open the data of vector
format with OWON analysis software, or direct open the bitmap.
Note: It has clew in a series of process USB operation storage, such as "USB save successfully".
USB disk Requirements
The supported format of the USB disk: FAT32 file system, the allocation unit size
cannot exceed 4K, mass storage USB disk is also supported. If the USB disk doesn't
work properly, format it into the supported format and try again. Follow any of the
following two methods to format the USB disk: using system-provided function and
using the formatting tools. (The USB disk of 8 G or 8 G above can only be formatted
using the second method – using the formatting tools.)
Use system-provided function to format the USB disk
1. Connect the USB disk to the computer.
2. Right click Computer- Manage to enter Computer Management interface.
3. Click Disk Management menu, and information about the USB disk will display
on the right side with red mark 1 and 2.
Disk Management of computer
Loading ...
Loading ...
Loading ...