Loading ...
Loading ...
Loading ...
8-Advanced Function of Oscilloscope
60
－－＞
1/2
To next menu
Start Frame 1-1000 Set start frame.
Cur frame 1-1000
Select current frame to be played.
End frame 1-1000 Set End frame.
Direction
Increase
Decrease
The value increases at the mode of setting start frame, cur frame and
end frame
The value decreases at the mode of setting start frame, cur frame and
end frame
－－＞
2/2
Back to previous menu (Only when Sync is set as Line NUM).
Note: the Run/Stop button can also replay or continue the waveform display.
Storage: Store recorded waveforms in non-volatile memory according to the setup frames.
Storage menu list：
Menu Setting Instruction
Start Frame 1-1000 Set first frame to be saved.
End frame 1-1000 Set last frame to be saved.
Direction
Increase
Decrease
The value increases from the set start frame to the end frame
The value decreases from the set start frame to the end frame
－－＞
1/2
To next menu
Save Save recorded waveform to internal memory location.
Load Recall recorded waveform from internal memory location.
－－＞
2/2
Back to previous menu.
Record the waveform as follows:
1. Press the MENU key and the function menu appears at the right of the screen.
2. Press the MENU ▲ or MENU ▼ key to select RECORD and five options are displayed at
the bottom of the screen.
3. Press the F1 key to select the Record mode.
4. Press F2 and set the End frame at 300 (select the direction as Increase or Decrease in the
second menu before step4).
5. Press F4 and set the time Interval to 1.00ms.
6. Press F5 to enter into the second menu.
Loading ...
Loading ...
Loading ...