Loading ...
Loading ...
Loading ...
Thermal Presence Detector User Manual
12
Steps
1. Go to Configuration → Health Tracking → Rule.
2. Click to add a rule, and enter a name for the rule.
3. Select the rule type as Out of Bed.
4. Click , and click on the live image to draw a region.
Note
● Only 1 out of bed rule can be configured.
● The rule area must be a convex quadrilateral.
5. Optional: Drag the frame to adjust the position of the drawn area.
6. Set the sensitivity for the rule.
7. Check to enable this rule.
8. Click Save.
9. Refer to Set Arming Schedule for setting scheduled time. Refer to Linkage Method Settings for
setting linkage method.
5.3 Set Out of Room Detection Rule
Set rules for the out of room detection. After enabling the rule, the device triggers alarms when
the people leave the room.
Before You Start
Go to Configuration → System → Maintenance → VCA Resource Type, and select Temperature
Measurement + Health Tracking.
Steps
1. Go to Configuration → Health Tracking → Rule.
2. Click to add a rule, and enter a name for the rule.
3. Select the rule type as Out of Room.
4. Click , and a yellow line will appear on the live view.
5. Select the line crossing direction from the drop-down list.
6. Optional: Left click the yellow line, hold the mouse to adjust its position, and drag the end of the
line with the mouse to adjust its length and angle.
7. Set the sensitivity for the rule.
8. Check to enable this rule.
9. Click Save.
10. Refer to Set Arming Schedule for setting scheduled time. Refer to Linkage Method Settings for
setting linkage method.
Loading ...
Loading ...
Loading ...