Loading ...
Loading ...
Loading ...
Thermal Presence Detector User Manual
11
Chapter 5 Health Tracking
Health tracking is used to detect out of bed, out of room, and exit without return for specified
groups, such as the elderly in nursing homes. The device triggers alarms when there are
exceptions, so as to prevent accidents.
5.1 Set Exit Without Return Detection Rule
Exit without return detection detects if the people stay in the toilet for over long time. Set the
detection rule for this function, and the device triggers alarms when the in-toilet duration exceeds
the set value.
Before You Start
Go to Configuration → System → Maintenance → VCA Resource Type, and select Temperature
Measurement + Health Tracking.
Steps
1. Go to Configuration → Health Tracking → Rule.
2. Click to add a rule, and enter a name for the rule.
3. Select the rule type as Exit Without Return.
4. Click , and a yellow line will appear on the live view.
Note
B is the toilet direction.
5. Optional: Left click the yellow line, hold the mouse to adjust its position, and drag the end of the
line with the mouse to adjust its length and angle.
6. Set the duration for the in-toilet time.
7. Check to enable this rule.
8. Click Save.
9. Refer to Set Arming Schedule for setting scheduled time. Refer to Linkage Method Settings for
setting linkage method.
5.2 Set Out of Bed Detection Rule
Set a rule for the out of bed detection. After enabling the rule, the device triggers alarms when the
people leave the bed.
Before You Start
Go to Configuration → System → Maintenance → VCA Resource Type, and select Temperature
Measurement + Health Tracking.
Loading ...
Loading ...
Loading ...