Loading ...
Loading ...
Loading ...
User Manual of Thermal Smart Linkage Tracking System
18
Figure 3-26 Tighten the Screws
6. Install the PT joint
1) Disassemble the PT joint.
PT Joint Top
PT Joint Bottom
Figure 3-27 Disassemble the PT Joint
2) Route the cables from the bracket through the PT joint bottom.
3) Adjust the pan direction of the PT bottom (range: - 45° to + 45°).
4) Fix the PT joint bottom to the bracket with the M6 × 12 screws.
Figure 3-28 Bracket Installation
7. Install the junction box.
1) Route the cables through the bottom hole of junction box.
2) Align the PT joint screw holes with the junction box screw holes. Make sure the
TOP on the junction box points to the installation wall.
Loading ...
Loading ...
Loading ...