Loading ...
Loading ...
Loading ...
User Manual of Thermal Smart Linkage Tracking System
11
Figure 3-7 Drill Screw Hole and Insert Expansion Screw
3. Route the cables through the internal part of the bracket and then secure the
bracket with 4 hex nuts and washers.
Figure 3-8 Drill Screw Holes
3.2.2 Horizontal pole mounting
Steps:
1. Get the bracket and accessories from the packing box.
2. Install the loop onto the pole.
1) Fix the loop with the pole loosely.
2) Route the loop rings into the holes of the fixing plates to fix the fixing plates
onto the loop.
Loop
Upper Fixing Plate
Bottom Fixing Plate
Figure 3-9 Install the Loop to the Pole
The upper fixing plate has three screw holes on the surface, and is used for fixing
the bullet camera or box camera.
The bottom fixing plate has four screw holes on the surface, and is used for fixing
the speed dome.
Make sure that the upper fixing plate is on the right top of the pole and the
bottom fixing plate is on the right bottom of the pole.
Loading ...
Loading ...
Loading ...