Loading ...
Loading ...
Loading ...
User Manual of Thermal Smart Linkage Tracking System
10
MicroSD Card
Figure 3-6 Insert the MicroSD Card
4. Use the screwdriver to cover the memory card slot.
3.2 Bracket Installation
The speed dome can be installed to a thread interface or non-thread interface
bracket. The non-thread bracket is highly recommended.
When you select a thread bracket, please install the pendent adapter (supplied)
between the bracket and speed dome. Any mismatch problems shall be taken
responsibility by the user.
The dimension of pendant adapter is G1
1
2
.
For cement wall, you need to use the expansion screw to fix the bracket.
For wooden wall, you can just use the self-tapping screw to fix the bracket.
Please make sure that the wall is strong enough to withstand at least 8 times the
weight of the dome and the bracket.
The wall must be thick enough to mount the expansion screws.
3.2.1 Wall Mounting
Steps:
1. Get the bracket and screws from the packing box.
2. Drill 4 φ12 screw holes in the wall according to the screw hole sites of the bracket,
and then insert M8 expansion screws into the screw holes.
Loading ...
Loading ...
Loading ...