Loading ...
Loading ...
Loading ...
14
Operating Chases
Manual Chase Operation
Chases can be run in Manual, Auto-Run, and Music Auto-Run modes.
This is used to manually step through a chase. It is done in program mode and is
useful when creating or editing chases.
1. Press and hold the PROGRAM button to enter program mode. The display PRO-
GRAM indicator will continuously ash while in program mode.
2. Select a chase, 1 – 6, by pushing the appropriate CHASE button.
3. Press TAP/SYNC and the display will show the chase and step numbers. The
display STEP indicator will light.
4. Use the BANK UP and BANK DOWN buttons to cycle through the chase steps.
5. When nished, press and hold PROGRAM for 3 seconds to exit the program mode.
Run a Bank of Scenes Automatically
Run Scenes Automatically with Music Sync
Scene Music Auto-Run
The scene Auto-Run function will continuously cycle through a bank of scenes. The
operator can control the speed and scene fade time. To adjust the speed use the
TAPSYNC button or the SPEED fader. To control the fade time use the FADE TIME
fader. Scenes can also be synchronized to music or MIDI note triggering.
1. Select the appropriate scene bank using BANK UP or BANK DOWN.
2. Push AUTO/DEL. This will cause the scene Auto-Run to begin cycling and the
AUTO TRIGGER indicator on the display will light.
3. Adjust the speed and fade time as needed. If you set your speed faster than the
fade time then the scenes will advance before the fade is complete.
4. You can switch to another bank at any time using BANK UP and BANK DOWN.
5. To stop Auto-Run press the AUTO/DEL button. The AUTO TRIGGER indicator on
the display will go OFF.
This unit has an internal microphone which can be used to Auto-Run scenes with
music synchronization.
1. Press MUSIC/BANK COPY. The MUSIC TRIGGER indicator on the display
will light.
2. To switch to a different scene bank use BANK UP or BANK DOWN.
3. You can adjust the duration time using the FADE TIME fader.
4. To stop Music Auto-Run press the MUSIC/BANK COPY button.
Chase Review:
1. Select any one of the 6 CHASE buttons.
2. Press the TAPSYNC/DISPLAY button to view the step number on the display.
3. Press the BANK UP/BANK DOWN buttons to review all the scenes in a chase.
Loading ...
Loading ...
Loading ...