Rockville ROCKFORCE W2 User Guide

Loading ...

Delete a Scene/Step in a Chase

Delete a Complete Chase

Clear all Chases

1. Select a chase, 1 – 6, that contains the scene to be deleted.

2. Press TAPSYNC/DISPLAY button to switch the LED display to steps.

3. Use BANK UP or BANK DOWN to advance to the scene/step you wish to delete.

4. Push AUTO/DEL button to delete the step/scene. All LEDs will blink.

1. Press and hold the CHASE button corresponding to the chase you wish to delete.

2. Now also press AUTO/DELETE. All LEDs will blink.

3. Release both buttons.

This sequence will delete all the steps of all the chases. It does not clear scenes.

1. Turn the unit off.

2. Turn the power on while simultaneously pressing and holding the BANK DOWN

and AUTO/DEL buttons.

3. Keep holding down the buttons until all LEDs ash indicating that the chases

have been cleared.

scene you wish to insert is in a different bank, use BANK UP or BANK DOWN to

select the desired bank.

6. Push MIDI/ADD to insert the scene. All the LEDs will blink indicating that the scene

has been copied.

Operating Scenes

Manual Mode

When the ROCKFORCE W4 is turned on, it defaults to manual scene mode with

bank 1, scene 1 active.

The manual mode allows direct control of all scanners. You are able to move them

and change attributes by using the channel fader. All changes made while in

Manual mode are temporary and will not be recorded.

1. Press the AUTO/DEL button repeatedly until the MANUAL LED is lit.

2. Select a SCANNER button.

3. Move the faders to change xture attributes. Press the TAPSYNC/DISPLAY

button to toggle the output indicator in the LED display between DMX values (0 –

255) and percentage (0 – 100%).

Review Scene or Chase

This instruction assumes that you have already recorded scenes and chases on the

controller. Otherwise skip section and go to programming.

Scene Review:

1. Select any one of the 30 banks by pressing the BANK UP/BANK DOWN buttons.

2. Select a SCENE button, 1 – 8, to review.

3. Move wheel and faders to change xture attributes.

Loading ...

Rockville ROCKFORCE W2 192 Channel Wireless 2.4Ghz DMX Lighting Controller