Hikvision DS-K1T671TMW User Manual

Loading ...

●

The employee ID should be less than 32 characters. It can be a combinaon of lower leers,

upper leers, and numbers. It should not be duplicated, and should not start with 0.

●

Requirements of face picture should follow the rules below: It should be taken in full-face

view, directly facing the camera. Do not wear a hat or head covering when taking the face

picture. The format should be JPEG or JPG. The resoluon should be 640 × 480 pixel or more

than of 640 × 480 pixel. The picture size should be between 60 KB and 200 KB.

7.4.3 Export Data

Steps

Plug a USB ash drive in the device.

On the Home page, tap Data → Export Data .

Tap Event Data, User Data, or Face Data.

Oponal: Create a password for exporng. When you import those data to another device, you

should enter the password.

Note

●

The supported USB ash drive format is DB.

●

The system supports the USB ash drive with the storage of 1G to 32G. Make sure the free

space of the USB ash drive is more than 512M.

●

The exported user data is a DB le, which cannot be edited.

7.5 Identy Authencaon

Aer network conguraon, system parameters conguraon and user conguraon, you can go

back to the inial page for identy authencaon. The system will authencate person according

to the congured authencaon mode.

You can authencate identy via 1:1 matching or 1:N matching.

1:N Matching

Compare the captured face picture or the collected ngerprint picture with all face pictures or

all ngerprint pictures stored in the device.

1: 1 Matching

Compare the captured face picture or the collected ngerprint picture with all face pictures or

all ngerprint pictures stored in the device.

7.5.1 Authencate via Single Credenal

Set the user authencaon type before authencaon. For details, see Set Authencaon Mode .

Authencate face, card or QR code.

Face

DS-K1T671 Series Face Recognion Terminal User Manual

Loading ...

Hikvision DS-K1T671TMW Ultra Face Recognition Terminals