Hikvision DS-K1T671TMW User Manual

Loading ...

Chapter 4 Wiring

You can connect the RS-485 terminal with the RS-485 card reader, connect the NC and COM

terminal with the door lock, connect the SENSOR terminal with the door contact, the BTN/GND

terminal with the exit buon, connect the alarm output and input terminal with the alarm output/

input devices, and connect the Wiegand terminal with the Wiegand card reader or the access

controller.

If connect the WIEGAND terminal with the access controller, the face recognion terminal can

transmit the authencaon informaon to the access controller and the access controller can

judge whether to open the door or not.

Note

●

If cable size is 18 AWG, you should use a 12 V power supply. And the distance between the

power supply and the device should be no more than 20 m.

●

If the cable size is 15 AWG, you should use a 12 V power supply. And the distance between the

power supply and the device should be no more than 30 m.

●

If the cable size is 12 AWG, you should use a 12 V power supply. And the distance between the

power supply and the device should be no more than 40 m.

4.1 Terminal Descripon

The terminals contains power input, alarm input, alarm output, RS-485, Wiegand output, and door

lock.

The terminal's diagram is as follows:

DS-K1T671 Series Face Recognion Terminal User Manual

Loading ...

Hikvision DS-K1T671TMW Ultra Face Recognition Terminals