Loading ...
Loading ...
Loading ...
23USING yOUR INDUCTION hOB
Activating and deactivating
Press and hold
to activate or deactivate the hob.
Pot detection
This feature indicates the presence of cookware on the
hob and deactivates the cooking zones if no cookware is
detected during a cooking session.
If you put cookware on a cooking zone before you select
a heat setting, the indicator above 0 on the control bar
appears.
If you remove cookware from an activated cooking
zone and set it aside temporarily, the indicators above
the corresponding control bar will start blinking. If
you do not place the cookware back on the activated
cooking zone within 60 seconds, the cooking zone will
automatically deactivate.
To resume cooking, make sure to put the cookware back
on the cooking zones within the indicated timeout.
Using the cooking zones
Place the cookware in the centre of the selected zone.
Induction cooking zones adapt to the dimension of the
bottom of the cookware automatically.
You can cook with large cookware placed on two
cooking zones at the same time. The cookware must
cover the centres of both zones but not go beyond the
area marking. If the cookware is located between the
two centres, Bridge function will not be activated.
USING YOUR INDUCTION HOB
Heat setting
1. Press the desired heat setting on the control bar.
The indicators above the control bar appear up to the
selected heat setting level.
2. To deactivate a cooking zone, press 0.
PowerBoost
This function makes more power available to the
induction cooking zones. The function can be activated
for the induction cooking zone only for a limited period
of time. After this time the induction cooking zone
automatically sets back to the highest heat setting.
To activate the function for a cooking zone: touch
.
To deactivate the function: change the heat setting.
Loading ...
Loading ...
Loading ...