Loading ...
Loading ...
Loading ...
Pic. 1 Pic. 2
Short-press the bu�on indicated as below, the camera icon “ ” on the LCD
screen flashes once, the camera takes one photo;
Long-press the same bu�on, the video icon “ ” on the LCD screen flashes
slowly, the camera is taking video. Long-press again will exit shoo�ng.
Camera
14 15
Product Assembly cont.
Remote Control Status Indicator
StatusNo. Meaning
Indicator lights “ ” flash
quickly.
The remote control beeps
with steady “beep…beep”
sound and the ba�ery icon
“ ” on the LCD display is
flashing.
Ba�ery icon “ ” on LCD
display is as shown (with
steady beep...beep...beep)
sound.
4
3
2
1
5
Ba�ery icon “ ” on LCD
display is as shown with
steady long beep sound.
Signal icon on LCD display
is less than two bars or
not displaying, with steady
“beep...beep...beep”
sound.
The remote controller is under
Signal
Connec�on Status.
The remote controller ba�ery is low.
Drone’s Ba�ery is running low, the
drone will return if the flight al�tude
is between 100 feet and 330 feet.
Drone’s ba�ery is low, the drone
willreturn if the flight al�tude or
distance is far than 50 feet; If the
distance is less than 50 feet, the
drone will land on the taking off
spot.
1. The distance between the drone
and remote controller is so long that
the signal is weak.
2.The ba�ery is removed a�er the
drone connects to the remote
controller.
How to Pair the Remote to the Drone
Step 1: Press and hold the red bu�on “ ” and simultaneously turn “ON”
the remote controller (by moving the power switch to the right) (Pic. 1). The
remote controller will send out 2 “beeping” sounds and the indicator light
“ ” will keep flashing.
Step 2: Press the power bu�on to power on the drone (Pic. 2). The drone will
make a power-on sound with indica�on light flashing and will automa�cally
link to the remote controller. Once the remote controller sends out a long
beep sound and the indicator light of the remote controller turns from
flashing to solid on and the signal icon “ ” is shown on the LCD screen, it
means that signal connec�on is succeeded.
Signal connec�on will only need to be completed once. The remote
controller will remember your drone once paired.
Drone Ini�aliza�on Detec�on
A�er Signal Connec�on has been successful, the drone enters the
ini�aliza�on detec�on procedure. Make sure that the drone is set on a
flat and level surface for this step. In this �me, the green light flash fast. If
the drone is always in ini�aliza�on, can’t enter compass calibra�on.
Please place the drone in ground, let the drone do gyro calibra�on to exit
the ini�aliza�on. The ini�aliza�on process takes about 5 seconds. The
process is done once the indicator light stay on.
ATTENTION: Please make sure that the drone is set on a flat and level
surface for the ini�aliza�on detec�on procedure to be successful. If
the drone is always in ini�aliza�on, can’t enter compass calibra�on.
Please place the drone in ground, let the drone do gyro calibra�on to
exit the ini�aliza�on.
Loading ...
Loading ...
Loading ...