Loading ...
Loading ...
Loading ...
Two Steps for Geomagne�c Calibra�on:
Drone Geomagne�c Calibra�on
Drone Geomagne�c Calibra�on (con�nued)
Step 1) Horizontal Calibra�on
When the drone's indicator lights flash yellow alterna�vely, hold the
drone
horizontally and rotate it 360 degrees along the horizontal axis for
about 3 circles (counterclockwise). The drone’s indicator lights will
change from flashing yellow to flashing green alterna�vely when
complete.
Drone
Compass Calibra�on must be done for each flight. When
changing new ba�ery or the ba�ery is reinstalled, Compass
Calibra�on should be done again. Compass Calibra�on must be
performed a�er successful drone ini�aliza�on detec�on.
Step 2) Ver�cal Calibra�on
Hold the drone ver�cally with its front (camera) facing up and rotate it 360
degrees counterclockwise along its horizontal axis for about 3 full circles un�l the
indicator light of the drone change from flashing to solid. A�er you are done with
this step, please set the drone on a flat surface and wait for the satellite signal
connec�on to be at least 7 and above. The calibra�on will be successful when
the indicator light is solid green.
ATTENTION:
● To fly with GPS mode, choose an open and wide space for the flight.
Please also make sure that there be at least 7 satellite signals showing
on your controller.
● In GPS mode, if the drone cannot hover at a fixed point or the fixing
performance is poor, please re-calibrate the geomagne�c, it can
improve the flight performance.
●
DO NOT calibrate drone compass in an area with a strong magne�c
field (such crowded areas as parking lots, heavy traffic zones).
●
DO NOT carry ferromagne�c materials, such as keys, phones, etc.
with you during calibra�on.
● DO NOT calibrate near large pieces of metal.
16 17
Before unlock the drone, please operate as picture to enter the geomagne�c
calibra�on.
Loading ...
Loading ...
Loading ...