Loading ...
Loading ...
Loading ...
Network Speaker and Audio Column User Manual
4
2.2 Network Configuration
2.2.1 TCP/IP Configuration
Steps
1. Click Configure → Network → Network Configuration → TCP/IP to enter the configuration page.
2. Configure network parameters.
3. Select NIC Type, slide to enable DHCP, and manually enter IPv4 Address, IPv4 Subnet Mask, IPv4 Default
Gateway, MTU, Preferred DNS Server address, and Alternate DNS Server address.
Note
Click Test to test if IPv4 address is used.
3. Click Save to complete the configuration.
2.2.2 Set Port
Port configuration parameters include HTTP port and HTTPS port. Set corresponding port as needed.
Configure HTTP(s) Port
Click Configure → Network → Network Service → HTTP(S) to configure HTTP port and HTTPS port.
HTTP Port
When you log in with a browser, you need to add the modified port number after the address. If HTTP port
No. is changed to 81, you can enter http://192.0.0.65:81 when you log in via browser.
HTTPS Port
Configure HTTPS port for browser access, and certificate verification is required.
Click Save to complete the configuration.
2.2.3 Device Access Settings
The device can be operated by mobile client.
Steps
1. Click Configure → Network → Working Mode to enter the configuration page.
2. Select platform access mode.
– Select ISUP as platform access mode.
Slide Enable to select Protocol Version.
Configure Server Address, set Port No., enter Device ID, and set Secret Key.
– Select Hik-Connect as platform access mode.
Slide Enable to enable the mode, check Custom after server address and enter the address. Configure
the Verification Code.
Loading ...
Loading ...
Loading ...