Loading ...
Loading ...
Loading ...
Network Speaker and Audio Column User Manual
7
number reads as a number, and adding [n2] before a number reads as a numerical value.
● Word Pronunciation Settings [h1][h2]: The default setting is active judgement. Adding [h1]
before a word reads as letters of the word, and adding [h2] before a word reads as the word.
● English Pronunciation Settings for Number 0[o0]/[o1]: The default [o1] number 0 is pronounced
as zero in English. Adding [o0] before the sentence reads as o. The number 0 will only take
effect when read as a number, i.e. marking as [n1]. When processed as a numerical value 0,
marking as [n2], it will be affected by the marking n
，
and read as a numerical value.
2) Slide to adjust volume. Volume range is from 0 to 200. If the volume is over 100, volume gain will be
expanded.
3) Adjust Broadcast Ratings.
Note
Broadcast ratings should be between 0 and 15.
4) Select Play Mode.
Play Once
Play in the order of audio list. Each audio will be played only once.
Loop
Repeat in order.
Note
When selecting task type as week schedule, you need to select cycle period.
5) Click Save to finish the configuration.
7. Select Start Date and End Date.
8. Click Save to complete the configuration.
9. (Optional) Copy broadcast task. Click to copy the current day’s audio broadcast schedule to the rest of the
week.
2.5.3 Strategy Configuration
You can set multiple audio playing strategies through strategy settings.
Click Configure → Broadcast Settings → Strategy Settings to enter the configuration page. Enable Continue
Broadcast in Next Day. The device will continue to broadcast the broadcast at the set time of the next day. Click
Save to save the settings.
2.6 Alarm Configuration
Set alarm input and audible alarm output.
Alarm Input
Click Configuration → Alarm Configuration → Alarm Input to enter alarm input settings. After any alarm input
No., click to enter the editing page, set alarm type, alarm name, enable alarm input handling, configure
arming schedule and linkage method, click Copy to… and select alarm input No. to copy the schedule to the alarm
input No., and click Save to finish the settings.
Loading ...
Loading ...
Loading ...