Loading ...
Loading ...
Loading ...
4
• The location must not be near anything that can contaminate the dispenser and/or the ice inside.
• The location must not be in an area subject to corrosive elements.
• The ice dispenser should be mounted on the legs provided and leveled by screwing the leg
adjusters in or out as required. If the legs are not used, shim the bottom of the dispenser as
required to make it level. Seal any gaps at the floor with approved sealant or use cove molding
for larger gaps.
• The installation location must have a stable and level surface capable of supporting the weight
of the ice machine and dispenser, with a full bin of ice.
After locating the dispenser, apply the gasket provided and position the ice machine with its back
flush with the back of the dispenser.
Align the two ice machine mounting holes with the forward fasteners in the top of the dispenser
side walls. Attach the ice machine with the two hollow bolts and washers provided.
Loading ...
Loading ...
Loading ...