Loading ...
Loading ...
Loading ...
11
Removal from service
When the ice dispenser is determined to be no longer useable, please be sure that it is rendered
safe for storage or disposal. All applicable recycling measures should be exercised to avoid
injury or harm to the environment. Neither the manufacturer nor seller is responsible for any
harm or damage to people, animals, property or the environment caused by improper installation
or disposal.
Problems and Solutions
PROBLEM
POSSIBLE CAUSE
SOLUTION
Dispenser not operating
No Power to Dispenser
Reset Circuit Breaker or Replace
Fuse
Agitation Motor Does Not Turn
If the Agitation Motor Does Not Turn
for a Few Seconds at the Initiation of
Power to the Dispenser or Periodically
Thereafter, But Does Turn When the Ice
Button is Pushed, the Agitation Timer
May be Defective
Replace Agitation Timer
If the Agitation Motor Does Not Turn
When the Ice Button is Pushed, but
Does Turn for a Few Seconds at the
Initiation of Power to the Dispenser, the
Ice Button or the Relay May be
Defective.
Replace Ice Button or Relay
If Agitation Motor Does Not Turn at
Application of Power, or When Ice
Button is Pushed, the Agitation Motor
or Motor Capacitor May be Defective
Replace Agitation Motor or
Capacitor
Agitation Motor is Energized, but is
Stuck and Cannot Turn. Periodic
Agitation May Not be Occurring
Disconnect and Reconnect Power to
the Dispenser. If Motor Does Not
Energize for a Few Seconds at
Application of Power, Replace
Agitation Timer
Agitation Motor Continues to
Turn for More Than a Few
Seconds after the Ice Button is
Released
Ice Button May be Stuck or Defective.
Relay May be Defective.
Unstick or Replace Ice Button, or
Replace Relay as Required
Ice Stop Does Not Open When
Ice Button is Pushed.
Ice Stop Operator, Operator Capacitor,
Relay or Limit Switch May be Defective.
Ice Stop Linkage May be Damaged.
Check and Replace Operator,
Capacitor, Relay, Limit Switch or
Linkage as Required.
Ice Stop Does Not Close When
Ice Button is Released.
Ice Stop Operator, Operator Capacitor
or Limit Switch May be Defective. Ice
Stop Linkage May be Damaged.
Check and Replace Operator,
Capacitor, Limit Switch or Linkage as
Required.