Loading ...
Loading ...
Loading ...
Troubleshooting en
41
Fault Cause and troubleshooting
Condensation in the
condensation tank
even though the water
drain hose is connec-
ted.
▶ Ensure that the water drain hose is connected cor-
rectly.
→"Connecting the water drain hose", Page14
The programme does
not start.
Childproof lock is activated.
▶ Deactivate childproof lock.
→"Deactivating the childproof lock", Page34
Start/ Reload has not been pressed.
▶ Press Start/ Reload .
No programme set.
1.
→"Setting a programme", Page29.
2.
→"Starting the programme", Page29.
The length of the pro-
gramme changes dur-
ing the drying cycle.
The programme operation is optimised electronically.
This may change the programme duration.
▶ Not a fault – no action required.
Pumping noise. Condensation pump active.
▶ Not a fault – normal operating noise.
Buzzing noise. Compressor ventilation active.
▶ Not a fault – normal operating noise.
The drying time is too
long.
Fluff filter is soiled.
▶
→"Cleaning the fluff filter", Page30
The ambient temperature is greater than 30°C.
▶ Ensure that the ambient temperature is below 30
°C.
The ambient temperature is lower than 15 °C.
▶ Ensure that the ambient temperature is above
15°C.
Insufficient air circulation at the appliance's installation
location.
▶ Ventilate the appliance's installation location.
Insufficient condensation for the automatic self-clean-
ing when permanently drying small loads of laundry.
▶ Regularly dry a load weighing more than 3kg of
damp laundry until the programme ends.
Insufficient condensation for the automatic self-clean-
ing when permanently using the crease-removal func-
tion.
▶ Regularly dry a load weighing more than 3kg of
damp laundry until the programme ends.
Loading ...
Loading ...
Loading ...