Loading ...
Loading ...
Loading ...
en Troubleshooting
40
Fault Cause and troubleshooting
Appliance paused, but
the drum is rotating.
Cooling process active.
▶ Not a fault – no action required.
Creasing. The load is too large.
▶ Observe the maximum load capacity of the
→"Programmes", Page25.
The laundry lies in the drum for too long after drying.
1. Remove the laundry from the drum as soon as the
drying programme has finished.
2. Spread the items of laundry for cooling.
Unsuitable programme for the type of fabric.
▶ Set the suitable programme for the type of fabric.
→"Programmes", Page25
Easy-Care fabrics are dried for too long.
▶
→"Changing the dryness level", Page33.
▶
→"Adjusting the dryness level", Page33.
Crease-reduction function not activated.
▶ Activate the crease-reduction function.
→"Buttons", Page23
and programme
terminated.
Condensation tank filled.
1.
→"Emptying the condensation container", Page32.
2.
→"Inserting the condensation container", Page33.
3.
→"Starting the programme", Page29.
Water drain hose is caught or jammed.
1. Ensure that the water drain hose is not kinked or
trapped.
2. Route the water drain hose without kinks.
Water drain hose is not connected correctly.
▶ Ensure that the water drain hose is connected cor-
rectly.
→"Connecting the water drain hose", Page14
Water drain hose is blocked.
▶ Rinse the water drain hose with tap water.
The filter for the condensation tank is soiled.
▶
→"Clean the filter for the condensation tank.",
Page38.
Condensation in the
condensation tank
even though the water
drain hose is connec-
ted.
The remaining volume of condensation may remain in
the condensation container.
▶ Not a fault – no action required.
Water drain hose is not connected correctly.
Loading ...
Loading ...
Loading ...