Loading ...
Loading ...
Loading ...
4. Oponal: Check Save VCA Picture to save the captured pictures of VCA detecon.
5. Set the detecon rules and detecon areas.
1) Set Arming Area. Up to 4 arming areas are selectable.
2) Adjust Sensivity. Sensivity: Range [0-100]. The higher the value is, the more easily the
detecon alarm can be triggered.
3) Oponal: Set Target Detecon as Human or Vehicle to discard alarms which are not triggered
by human body or vehicle.
Note
This funcon is only available for certain models.
4) Click Draw Area and draw a quadrilateral in the preview window by specifying four vertexes of
the detecon region.
6. Set the arming schedule. Refer to Congure Arming Schedule for details.
7. Set the linkage acons. Refer to Congure Alarm Linkage Acon for details.
8. Click Apply.
6.4.3 Other Events
Thermal Camera Detecon
The device supports the event detecon modes of thermal network cameras: re detecon,
temperature detecon, etc. You can congure the arming schedule and linkage acons of the
selected event.
Before You Start
Add a thermal network camera to your device and make sure the camera is acvated.
Steps
1. Go to Conguraon → Event → Other Events .
2. Select a thermal camera detecon event.
3. Set Camera.
4. Set the arming schedule. Refer to Congure Arming Schedule for details.
5. Set the linkage acons. Refer to Congure Alarm Linkage Acon for details.
6. Click Apply.
6.4.4 Congure Arming Schedule
Steps
1. Click Arming Schedule.
2. Choose one day of a week and set the me segment. Up to eight me periods can be set within
each day.
Network Video Recorder User Manual
62
Loading ...
Loading ...
Loading ...