Loading ...
Loading ...
Loading ...
6.2.4 NTP
Your device can connect to a network me protocol (NTP) server to ensure that the system me is
accurate.
Steps
1. Go to Conguraon → Network → General → NTP .
2. Turn on Enable.
3. Enter the parameters.
Interval
Time interval between two me synchronizaon with NTP server.
NTP Server
IP address of the NTP server.
4. Click Apply.
6.2.5 Log Server Sengs
Upload Logs to the Server
You can upload system logs to the server for backup.
Steps
1. Go to Conguraon → Network → General → Log Server Sengs .
Figure 6-7 Log Server Sengs
2. Turn on Enable
3. Set Upload Time Interval, Server IP Address, and Port.
4. Oponal: Click Test to test if parameters are valid.
5. Click Apply.
Network Video Recorder User Manual
40
Loading ...
Loading ...
Loading ...