Hikvision DS-7108NI-Q1/M User Manual

Loading ...

Figure 6-4 Channel-Zero

4. Turn on Enable.

5. Congure Frame Rate, Max. Bitrate Mode, and Max. Bitrate. The higher frame rate and bitrate

require higher bandwidth requirement.

6. Click Apply.

6.1.3 User

Refer to User for details.

6.2 Network Conguraon

6.2.1 TCP/IP

TCP/IP must be properly congured before you operate video recorder over network.

Steps

1. Go to Conguraon → Network → General → TCP/IP .

2. Congure network parameters.

Working Mode

●

Mul-address Mode: The parameters of the two NIC cards can be congured

independently. You can select LAN1 or LAN2 in the NIC type eld for parameter sengs.

You can select one NIC card as default route. And then the system is connecng with the

extranet and the data will be forwarded through the default route.

●

Net-fault Tolerance Mode: The two NIC cards use the same IP address, and you can select

the Main NIC to LAN1 or LAN2. By this way, in case of one NIC card failure, the video

recorder will automacally enable the other standby NIC card so as to ensure the normal

running of the whole system.

●

Load Balance Mode: By using the same IP address and two NIC cards share the load of the

total bandwidth, which enables the system to provide two Gigabit network capacity

Network Video Recorder User Manual

Loading ...

Hikvision DS-7108NI-Q1/M 8-ch Mini 1U NVR