Loading ...
Loading ...
Loading ...
88
Installation Instructions
Warning:
Read the installation instructions before connecting the system to the power source.
Warning:
This product relies on the building’s installation for short-circuit (overcurrent) protection.
Ensure that the protective device is rated not greater than: 250V, 20 A.
Warning:
The system must be disconnected from all sources of power and the power cord.re-
moved from the power supply module(s) before accessing the chassis interior to install or
remove system components.
Warning:
Only trained and qualifiedpersonnel should be allowed to install, replace, or service this
equipment.
Warning:
This unit is intended for installation in restricted access areas. A restricted access area
can be accessed only through the use of a special tool, lock and key, or other means of
security. (This warning does not apply to workstations). The access can only be gained
by Skilled person or by Instructed person. Only authorized by well trained professional
person can access the restrict access location.
Warning:
There is the danger of explosion if the battery is replaced incorrectly. Replace the bat-
tery only with the same or equivalent type recommended by the manufacturer. Dispose of
used batteries according to the manufacturer’s instructions.
CAUTION:
This unit has redundant power sources. Please disconnect all the power cords before
servicing.
20. CAUTION: Always completely disconnect the power cord from your chassis whenever
you work with the hardware. Do not make connections while the power is on.
Sensitive electronic components can be damaged by sudden power surges.
21. CAUTION: Always ground yourself to remove any static charge before touching
the motherboard, backplane, or add-on cards. Modern electronic devices are very
sensitive to static electric charges. As a safety precaution, use a grounding wrist
strap at all times. Place all electronic components on a static-dissipative surface or in
a static-shielded bag when they are not in the chassis.
22. CAUTION: Any unveried component could cause unexpected damage. To ensure the
correct installation, please always use the components (e.g., screws) provided with
the accessory box.
Warning:
Do not alter the hardware configuration by installing, replacing, or upgrading hardware
components. Doing so will void our warranty.
Loading ...
Loading ...
Loading ...