Loading ...
Loading ...
Loading ...
34 en | RE3-RX receiver RE3 UHF Wireless
02-2023 | 05 | F.01U.362.808
User Manual
Electro-Voice
7.3.11 Adjusting receiver volume
Setting the receiver output gain through menu item 6, Volume sets the gain leaving the
receiver and arriving at the destination circuit; either a microphone preamp, or a line in
preamp.
1. Press the ▼ button to scroll down to Volume from the main menu.
2. Select by pressing SET to enter the Volume screen.
M
3. Group/Channel
E
4. Squelch
N
5. Mic Config
U
6. Volume
The display shows the current volume setting in dB of attenuation where 0 dB is the
highest output volume, and -50 is the lowest output volume before mute.
-10 dB
Setup Volume
3. Pressing ▲ increases the volume by 1 dB (press and hold the ▲ button quickly increases
the value)
OR
Pressing ▼ decreases the volume by 1 dB (press and hold ▼ button quickly decreases the
value).
4. Press SET to save changes and return to main menu.
M
3. Group/Channel
E
4. Squelch
N
5. Mic Config
U
6. Volume
5. Either scroll ▼ to Exit and press SET, or briefly press SYNC on the receiver front panel to
return to the home screen.
M
9. Keylock
E
a. Display Option
N
b. Reset
U
c. Exit
Loading ...
Loading ...
Loading ...